Figure E: Robot Head Assembly

Notes:

1) When disassembling the robot head, take care not to let Steel Ball 48 and Spring 49 fall out of Left Housing 45 since they are both small and easy to lose. Also, it helps if you disassemble on top of a towel or cloth. A small amount of grease or Vaseline will help hold them in place when you reassemble the parts.

2) In order for the two halves to come apart split teh spin label with a sharp knife or razor at the seam.

3) When assembling left and right housings 45 & 46, Friction Block 57 and Spring 58 must be compressed slightly in order for the two halves to fit together.

Model 1929: See Figure EEE

Robo-Pong 1000: See Figure EEEE

For Parts Pricing - Click Here