|
Trouble-Shooting
BALL SPEED/DISCHARGE PROBLEMS
|
|
NOTES:
|
|
1.
|
There are no adjustments to the
robot, so if a faulty or worn part causes the robot
to malfunction, replace that part.
|
|
2.
|
If you are not skilled at soldering,
you should send in your Control Box for service
if soldering is indicated. Control Box parts are
small and easily damaged. Improper soldering may
void your warranty and service policy.
|
|
3.
|
If you open the Control Box, unscrew
only the 4 corner screws. Do not remove the 4 screws
in the middle.
|
|
4.
|
The following solutions will apply
to all models of Newgy Robots, except if marked
with the following footnotes: 1Robo-Pong
1000 only, 2Robo-Pong 2000 only, 9Model
1929 only.
|
Footnotes:
1 Applies to Robo-Pong
1000 robots only.
2 Applies to Robo-Pong
2000 robots only.
9 Applies to Model
1929 robots only.
|
